TRIAX T.OF Fibre Range
The Fibre Advantage
TRIAX offers a complete range of solutions for your fibre installation.
TRIAX fibre is your preferred choice when you want:
- one discreet headend - distribute satellite, digital terrestrial and radio signals from a single location
- Design a system over a large area without jeopardizing signal and quality
- Install a single fibre cable only rather than multiple coaxial cables
Advantages for installers
- Easy dish alignment using a Wideband LNB
- Satellite and Terrestrial bands separated optically for improved signal quality
- High reliability
- Significant infrastructure savings
- Future-proof
New Installations
- Receive all broadcasts via Satellite and Terrestrial
- Supply several hundred apartments with only one Satellite dish station
- Improved building aesthetics
- A fibre optic cable replaces 4 coaxial cables per satellite position plus one for terrestrial reception
Triax Wideband LNB 290-2340MHz Vertical and Horizontal
*Art. No. 304860
The Wideband LNB converts the Vertical and Horizontal satellite signals (10.7 – 12.75GHz) off the dish to an intermediate frequency of 290 – 2340MHz.
AGC Wideband Input Amplifier
*Art. No. 307772
A two-input Wideband amplifier with Automatic Gain Control to maintain a constant output level. The amplifier is designed to be used with the Satellite Optical Transmitter TSOT, and has 2 fixed output levels
available, (depending on the size of the optical system it is connected to). For an optical system with a large number of optical splits select a high output.
For an optical system with a small number of splits select the low output.
- Automatic Gain Control and Automatic Slope Control on both satellite lines (V/H)
- DC input for powering amplifier and LNB
- Selectable between Wideband LNB (290 - 2400 MHz) and Universal LNB (950 - 2150 MHz)
- Output level selectable for up to 32 splits (-40 dB) or 64 splits (-30 dB)
Triax Optical Splitters
*Art. N. 307735
The fibre system can be connected to either an optical converter in the home
(to supply all the required TV services) or connected to an optical receiver to deliver services
over an integrated reception system. Planar lightwave circuit (PLC) splitter is a type of
optical power management device that is fabricated using silica optical waveguide technology.
It features a small size, high reliability, wide operating wavelength range, and good channel-to-channel
uniformity. It is widely used in PON networks to realize optical signal power splitting.
Technical specification
- Low Insertion loss and Low PDL
- Compact Design
- Good channel-to-channel uniformity
- Wide Operating Wavelength:
- From 1260nm to 1650nm
- Wide Operating Temperature:
- High Reliability and Stability
Triax Optical Transmitters
*TSOT Satellite Transmitter & TTOT Terrestrial Transmitter
Satellite Transmitter for Wideband V & H input from a single Satellite Terrestrial Transmitter + WDM for the
Satellite. The Satellite Transmitter takes 2 Wideband feeds from a Wideband LNB, 290MHz – 2340MHz,
Vertical, and Horizontal. The optical output from the transmitter can be combined with the
optical output from the Terrestrial transmitter. The Terrestrial transmitter has inputs from 5 – 790MHz
so it can receive FM, DAB, and Terrestrial TV signals. It also has a built-in Wave
Division Multiplexer (WDM) to combine the Satellite on a single optical output.
- Satellite Optical wavelength 1310 & 1330 nm
- Terrestrial Optical wavelength 1550nm
- RF input connectors – F type female
- Optical connectors – SC/APC
- High Optical output level +9dBm
TRIAX Optical receiver
*TWOC Optical Reciever
The TWCT has 2 Wideband outputs, Vertical and Horizontal
290MHz – 2340MHz and a separate Terrestrial output 5MHz – 790MHz.
The outputs from the converter can be used with the TdSCR switches
in Wideband mode to give the option of a 3 cable system
(carrying all the services from a single satellite position and terrestrial). Using
the TWOC (carrying the Wideband signals from a 2nd satellite position), these
can be added to the TdSCR switch to enable a 2 satellite position over a 5
cable backbone.
TRIAX Optical Converter
*TDC3 Optical Converter
The TDC3 has 2 dSCR/Quad outputs and a separate Terrestrial output.
The TDC3 can be used in two modes depending on the receiver connected to
the outputs. It can be connected to a standard Satellite receiver
with PVR function, or a Satellite receiver in SCR mode. Both
of the satellite outputs also carry the terrestrial services,
and there is also a separate terrestrial output on the converter.
TRIAX Wideband Fibre System
The Fibre Advantage
Advantages for the installer, tennant and landlord in residential complexes
TRIAX offer a complete range of solutions for your fibre installation.
Triax fibre is your preferred choice when you want:
- One discreet headend - distribute satellite, digital terrestrial and radio signals from a single location.
-Design a system over a large area without jeopardising signal and quality
- Install a single fibre cable only rather than multiple coaxial cables
Advantages for installers
- Easy dish alignment using a wideband LNB
-satellite and terrestrial bands seperated opticallt for improved signal quality
-high reliability
- significant infrastrucuture savings
- future proof
- Noise distortion and interference transmission
The Fibre possibilities
- Very long distances with minimal attenuation
- Lighter and thinner than coaxial cable
- No potential transient periods due to natural/galvanic isolation
- No influence by external electric or magnetic fields
